In this post, we will keep an eye on at the procedure of linking and Set up TP-LINK Wi-fi Wireless router designs from TP-LINK. This design is TL-WR940N and TL-WR941ND. I do not see the reason for composing a individual content for each design since the TL-WR941ND and TL-WR940N are almost similar in overall look and in connections. They also have the same management sections. The only distinction is that the TL-WR940N WiFi Router Login via 192.168.1.1 IP does not have any detachable antennas, and most likely there is a distinction in the components. This is not very important for us.

By the way, lately there was a current design of the router, in a dark situation. Regardless of which design you have, you can configure TP-LINK Wi-fi router according to this training. I will try to create everything in details and clearly. We will configure it through the cpanel. Therefore, the disk that you most likely in the kit, you can keep. It will not be useful to us. It only has a configurations application and a guide. You can try to configure the router with resources, but I would suggest doing this via the WEB interface.

Configure TP-LINK Wi-fi Wireless router through 192.168.1.1 IP:

Connect the cable to the router and connect it into the opening.
Connect the cable to the router and connect it into the opening.
In one of the yellow-colored connections, weblink the system wire that was involved.
Connect the other end of the wire to your laptop or computer in the system connect.
If you are establishing over Wi-Fi, then weblink your laptop laptop or computer to a network
You can switch off the energy on the router, if the system vanishes, then yours.
In nowhere connect (WAN), weblink the wire from your ISP
In the deal with of the internet browser, kind the deal with http://192.168.1.1 and go to it.
You should be persuaded for your sign in and protection password.
By standard, this is administration and administration (this details can be seen on the brand from the base of the router).
Enter them, and get into the cpanel.
Click the Wi-fi – Wi-fi Settings tab: Specify a name for your Wi-Fi system, pick your area from the record.
Then go to the Wi-fi – Wi-fi Security tab. We set passwords for Wi-Fi, that would not be able to connect to our system.
Select WPA / WPA2 – Individual (Recommended): In the area Wi-fi Password, We specify the protection password.
I suggest specifying exactly 8 figures. British characters and figures.
Click the Preserve key below to avoid wasting the configurations.

That’s all, Set up TP-LINK Wi-fi Wireless router. If you designed it, and you can weblink your gadgets to the Internet: laptop laptop or computer pcs, laptop or pcs, pills, phones, TV, etc. If you have issues during the configurations of the router, then discuss them in content, we will try to help you comprehend your condition.